Medical CT Film

1) 8in x 10in,11in x 14in, 14in x 14in,14in x 17in,35cm x 35cm,35cm x 43cm,etc.
2) Special specifications available according to customers' requirements..

This film is a general film with blue polyester bases, the obverse side coated with sensitive emulsion and the reverse side with a halation layer.

It is suited for general diagnostic radiography,such as:computed tomography, magnetic resonance imaging,ultrasonic imaging,isotope radiate shadow etc. It features abundant graduation and high definition.


The film should be handled carefully by the edges to avoid physical strains.

The best conditions of usage should be: temperature:18-24℃ ,humidity:50%RH-65%RH.

Hands must be clean, dry and free of lotions,etc.


This film is designed for 90-seconds automated processing or manual processing.

The former is recommended with any kinds of film processor, developing at 30-35℃ in 23s.

In manual processing ,the film should be developed in temperature 20℃ for 5 minutes, fixed in 5-8 minutes, washed for 10-30 minutes and dried.



Use a safelight filter (dark red) in a suitable safelight lamp equipped with a 15-watt bulb. Keep the film at least 4 feet (1.2 meters) from the safelight, and the total lighting time is in 10 minutes..


Store in a cool,dry place (The suitable temperature is 10-20℃,the humidity is 30%RH-60%RH).

Keep it away from dampness,high temperature,any bad effective gases,x-ray, gamma ray or any other penetrating rays.

Stored vertically to avoid any harmful effect caused by pressure.